⏱️ Estimated reading time: 11 min

On this page: Overview
Key Takeaways
Take them out of the shoes, brush off loose dirt, then wash them by hand in lukewarm water with a little mild soap or washing-up liquid. Scrub the top gently with a soft brush, rinse well and press out the water with a towel. Let them air-dry flat, away from radiators and direct heat, until they are completely dry before they go back in.
Only if the maker says you can. Many insoles are built from glued foam layers, and the heat, spin and tumbling of a machine can loosen the bond, warp the shape or squash the cushioning. If the care instructions only say washable, wash them by hand. Never put insoles in a tumble dryer.
Smell usually comes from sweat that has built up in the insole and the shoe. Wash the insoles by hand, dry them fully, and take them out after every long wear so they can air. Sprinkling a little bicarbonate of soda on a dry insole overnight and shaking it off in the morning can freshen it between washes. Clean socks and dry shoes matter just as much.
It depends on how far you walk, how long you stand and how much you weigh. BOLLSEN® Insoles are rated for 800 to 1,200 km, which is roughly 8 to 10 months for a 100 kg wearer on their feet 8 hours a day. Lighter use stretches that further. The wear signs below tell you more than the calendar does.
Look for a flattened, shiny patch under the ball of the foot or the heel, foam that no longer springs back when you press it, a top layer that is cracked, peeling or worn through, and a smell that comes back straight after washing. If your feet feel at the end of the day the way they did before you fitted the insoles, the cushioning has probably had its day.
Insoles have a harder life than the rest of the shoe. They sit under your foot for every step of the day, they soak up sweat that the upper never touches, and they are the first part of the shoe to start smelling. The good news is that most insoles are easy to look after, as long as you treat them gently. Hot water, a tumble dryer or a night on the radiator can ruin a pair faster than months of wear.
This guide covers how to wash and dry insoles without damaging the foam, how to keep them fresh when your feet sweat, and how to tell when a pair is due for replacement. If you are still choosing a pair, start with how to choose insoles, and for fitting a new pair, see our guide on how to size and trim insoles.
How do you wash insoles?
Hand-washing is the safe default for almost any insole, and it only takes a few minutes. Do both insoles at the same time so they wear and dry evenly.
- Take the insoles out. Lift them out of the shoes from the heel end. Washing them in the shoe leaves water trapped underneath, and the shoe will take days to dry.
- Brush off loose dirt. Knock the insoles together and use a dry brush to clear grit, dust and anything stuck to the underside.
- Wash in lukewarm water with mild soap. Fill a bowl or sink with lukewarm water and add a little mild soap or washing-up liquid. Avoid hot water, bleach and strong cleaning sprays, which can soften glue and dry out the top layer.
- Scrub gently. Work over the top surface with a soft brush or an old toothbrush, paying attention to the heel and the ball of the foot, where most sweat collects. Do not soak them for long; a few minutes in the water is enough.
- Rinse well. Rinse under clean running water until no soap is left, since leftover soap can make the surface feel sticky.
- Press, don’t wring. Lay each insole on a clean towel and press the water out. Twisting or wringing can crease the foam and loosen the layers.
- Air-dry flat. Leave them flat or propped up somewhere airy at room temperature until they are dry all the way through, which can take a day. Keep them away from radiators, heaters and direct sun, and never put them in a tumble dryer.
- Check before refitting. Press the thickest part with your thumb. If it still feels cool or damp, give it longer. A damp insole back in a closed shoe is how smells start.
Machine-washing is a different matter. Follow the maker’s care instructions: if they do not say an insole can go in the machine, wash it by hand. Our washable BOLLSEN® Insoles are made to be cleaned with the hand-wash steps above. They are built in layers, with EVA for flexibility, SEBS for softness, PORON® ShockPad foam for shock absorption and a Nylon Pebax shank for support, under a breathable, moisture-managing top layer with ventilation holes. Gentle washing keeps those layers together.
Odour and sweaty feet
Smelly insoles are rarely about the insole itself. The NHS explains that smelly feet are often caused by a build-up of sweat and bacteria, and it lists standing all day, exercise and hot weather among the things that make you sweat more. Sweat soaks into the insole, the shoe stays warm and closed, and the smell builds from there.
Washing the insoles helps, but it works best alongside a few everyday habits that the NHS also recommends:
- Wash your feet every day and dry them well, including between the toes.
- Wear clean socks every day, ideally in breathable or natural fabrics such as cotton.
- Let shoes dry out before you wear them again, and try not to wear the same pair two days in a row.
- Take the insoles out at the end of a long day so both the insole and the shoe can air.
If you work in boots all day, sweat is part of the job. Our guide to insoles for work boots covers how to manage heat and moisture in a closed boot. If you sweat heavily all the time, not just on hot days or long shifts, the NHS page on excessive sweating explains what can help and when to see a GP.
Itchy, flaky or cracked skin between the toes is something else: it can be athlete’s foot, a common fungal infection that a pharmacist can advise on. Washing insoles is good hygiene, but it is not a treatment for it.
Drying insoles between shifts
Most insoles do not need washing every week. What they need every day is the chance to dry out. Foam that stays damp from one day to the next feels flat and clammy and starts to smell much sooner.
- Take them out every evening. Pull the insoles out after a long day and stand them up or lay them on a shelf, so air reaches both sides.
- Open the shoes up. Loosen the laces and pull the tongue forward. A shoe dries faster when it is open than when it is laced shut by the door.
- Use gentle heat only. A warm room is fine. A radiator, a heater, a hairdryer or a sunny windowsill is not, because direct heat can warp the foam and weaken the glue between the layers.
- Stuff wet shoes with newspaper. After a soaking, paper in the shoe draws out moisture overnight. Dry the insole separately.
- Rotate if you can. Two pairs of shoes, or two pairs of insoles, means each pair gets a full day to dry before you wear it again.
Because good insoles are removable, they can also move between shoes. If you swap a pair from your work shoes into your trainers at the weekend, the work shoes get two clear days to air.
When should you replace insoles?
Every insole wears out in the end, however well you look after it. Cushioning foam is compressed with every step, and over months it recovers a little less each time. Cleaning keeps a pair fresh, but it cannot bring back the spring. We explain why cushioning fades as insoles wear in more detail in our guide to shock-absorbing insoles.
How long a pair lasts depends on how far you walk, how long you stand and how much you weigh. BOLLSEN® Insoles are rated for 800 to 1,200 km, which is roughly 8 to 10 months for a 100 kg wearer on their feet 8 hours a day. Lighter use stretches that further. Rather than counting kilometres, check your insoles every few weeks for these signs:
- A flattened forefoot or heel. A thin, shiny or compressed patch under the ball of the foot or the heel shows where the foam has packed down.
- Foam that stays pressed in. Press the heel with your thumb. A good insole springs back; a worn one stays dented for a moment.
- A cracked or worn-through top layer. Peeling, holes or bare foam showing at the heel or toes mean the surface has had its day.
- A smell that won’t wash out. If the odour is back as soon as the insoles are dry, sweat has worked deep into the foam.
- Your feet notice before you do. If your feet feel at the end of the day the way they did before you fitted the insoles, the cushioning has gone.
When it is time, replace both insoles together, even if only one looks worn, so both feet get the same feel. Buy your usual size and trim only to fine-tune the fit, using the old insole as a template.
An insole is a comfort product, and caring for it well keeps it comfortable for longer. If your feet hurt in a way that does not settle, or skin problems keep coming back despite good foot hygiene, see a GP. You may also be able to see a podiatrist; the Royal College of Podiatry can help you find a podiatrist near you.