⏱️ Estimated reading time: 12 min

On this page: Overview
Key Takeaways
They are insoles built with a layer that soaks up part of the jolt each time your foot meets the ground, mainly under the heel and the ball of the foot. Instead of the impact arriving as one sharp hit, the material compresses, slows it down and turns some of the energy into a little heat, so each step lands more gently.
PORON® is a microcellular polyurethane made by Rogers Corporation. Its tiny open cells squash under load, air moves through them and the polymer itself damps the movement, so the force is spread over a slightly longer moment. The cells then recover, and the material is engineered to resist compression set, which means it keeps more of its thickness over time.
Yes. Every foam loses some of its spring after thousands of steps, body heat and sweat, and the heel and forefoot go first. Better foams lose it more slowly. BOLLSEN® Insoles are rated for 800 to 1,200 km, roughly 8 to 10 months for a 100 kg wearer on their feet 8 hours a day.
Gel is dense and keeps its shape, but it is heavy, firm and does not breathe. PORON® urethane is lighter, works in thin layers, lets air through its open cells and is designed to keep its cushioning over time. For all-day wear in closed shoes, many people find a thin resilient foam layer more comfortable than a thick slab of gel.
Concrete does not give at all, so all the cushioning has to come from your shoes. Canada’s occupational health and safety centre, CCOHS, advises a shock-absorbing cushioned insole for work on cement or metal floors. Choose one that resists flattening, because hours of standing compress foam constantly rather than in short bursts.
Shock absorbing insoles in short: each step starts with a small collision at the heel and ends with a push through the forefoot. A shock absorbing insole puts a layer there that compresses and damps that load. Gel, EVA and microcellular polyurethane such as PORON® all do it differently, and the real difference is how long each one keeps doing it before it flattens.
“Shock absorbing” appears on almost every insole packet, which makes it nearly meaningless as a label. This guide explains what is actually happening under your foot, why some materials absorb impact for longer than others, and how to tell when a pair has stopped doing its job. If you want the full side-by-side of every common material, our comparison of gel vs foam insoles has the table, and if you are still deciding what kind of insole you need at all, start with how to choose insoles.
What does shock absorption in an insole actually mean?
When your foot lands, your body is moving downwards and the ground stops it. That sudden stop is the “shock”. An insole cannot remove the force, because your body weight still has to be carried, but it can change how the force arrives. A material that compresses as the heel lands stretches the stop over a few extra milliseconds, so the peak is lower and the step feels softer.
Good shock absorbing materials also damp the movement. Some of the energy of the landing is turned into a tiny amount of heat inside the material rather than being bounced straight back. That is different from pure springiness, and it is why a trampoline-like insole would feel odd: you want the landing softened, not returned.
It also helps to separate impact from feel. Softness is what you notice when you press an insole with your thumb or step on it in the shop. Shock absorption is what happens in the fraction of a second after the heel lands, step after step. A very soft foam can feel lovely and still squash flat under the heel, a point our guide to cushioned insoles looks at from the comfort side.
Heel strike and forefoot loading: where does impact happen?
Most people walk heel first. The outer edge of the heel touches down, the foot rolls forward, the whole sole takes the load for a moment, and then the weight moves onto the ball of the foot and the toes as you push off. That gives two zones where an insole works hardest.
- Heel strike: the short, sharp collision at the start of each step. This is where most of the “shock” is.
- Forefoot loading: a longer, rolling load under the ball of the foot as you push off. It is less sudden, but it repeats with every step and the area is small.
Your body already has its own damping. A gait study published in the Journal of Experimental Biology in 2010 measured ten adults walking at different speeds and found evidence that the soft tissues of the body absorb and return energy at each collision with the ground, behaving like a damped spring. The fatty heel pad is part of that system. An insole adds an extra layer on top of it, between the heel pad and a shoe that may already be thin or hard.
Standing is a slightly different job. There is little impact, but the load is continuous, and on concrete nothing underneath gives. The Canadian Centre for Occupational Health and Safety’s guidance on working in a standing position recommends a shock-absorbing cushioned insole for work on metal or cement floors, and also warns against cushioning so thick that it becomes unstable. If that is your day, our guide to insoles for standing on concrete all day covers the rest of the set-up.
Microcellular polyurethane vs EVA vs gel: how each one absorbs impact
Three materials do most of the shock absorbing in today’s insoles. They all soften a landing, but by different routes, and that decides how they age.
EVA (ethylene-vinyl acetate) is a light, closed-cell foam. Each cell is a tiny sealed bubble of gas, so when the heel lands the bubbles compress like miniature air cushions. EVA is cheap, easy to mould and very light, which is why it sits in so many shoe midsoles. Its weakness is that the cell walls slowly give way under repeated loading, so the foam gradually takes on the shape of the foot and feels firmer and flatter.
Gel works the other way. It is dense and viscous, behaves almost like a solid and barely compresses at all. Instead of squashing, it deforms sideways and damps the movement inside itself. Gel keeps its shape well, but it is heavy, firm rather than soft, and a sealed gel layer does not let air or moisture through, so it can feel warm in a closed shoe by the afternoon.
Microcellular polyurethane is a foam with very small, open cells. PORON® is a widely used example, made by the US materials company Rogers Corporation, which describes its PORON® Comfort technology as a proprietary open-cell structure averaging about 100 microns per cell. When the heel lands, the cell walls flex, air is pushed through the network and the polyurethane damps the motion. When the foot lifts, the cells recover. Because the cells are open, the foam can also let moisture vapour move rather than trapping it.
Within the PORON® range, Rogers lists PORON® ShockPad foam for absorbing impact in very thin designs, with excellent compression set resistance. That last phrase is the important one for anyone buying insoles, so it is worth explaining properly.
What is compression set and why does damping fade?
Compression set is the thickness a material fails to get back after being squeezed for a long time. The standard lab test for it, ASTM D395, treats it as a measure of how well a material keeps its elastic properties under prolonged compression. In an insole, prolonged compression is exactly what happens: body weight, eight hours a day, often in a warm and slightly damp shoe.
As a foam takes a set, three things happen together. It gets thinner under the heel and forefoot, so there is less material left to compress. The cells that remain are already partly crushed, so they reach the end of their travel sooner, which is called bottoming out. And the recovery between steps gets slower. The result is an insole that still looks fine from above but no longer softens the landing the way it did in the first weeks.
This is the real difference between shock absorbing materials. On the first day almost any foam feels cushioned. After a few hundred kilometres, the ones with low compression set are still doing most of their job, while the ones with high compression set have quietly turned into a thin, firm layer. Heat and moisture speed the process up, which is one reason to let insoles dry fully between long days.
How the BOLLSEN® layer stack splits the work
A single material rarely does everything well, so our own insole splits the work between layers, each with one job. BOLLSEN® Insoles with a PORON® ShockPad layer are built like this:
- PORON® ShockPad foam for shock absorption, the material chosen because it resists flattening.
- SEBS layer for softness underfoot.
- EVA layer for flexibility, so the insole bends with the shoe.
- Nylon Pebax shank for support, with a dynamic midfoot bridge that adapts to the foot.
- Breathable top layer that manages moisture, with ventilation holes through the insole.
The idea is simple: the SEBS gives softness, the PORON® ShockPad foam takes the repeated impact that would flatten a softer foam, and the shank keeps the midfoot from folding. They come in UK 4 to 12.5 (EU 36 to 47). Buy your usual size, then trim the toe end to fine-tune the fit for each pair of shoes. They are removable and washable, swap between trainers, work boots and walking shoes, and come with a 40-day money-back guarantee, so you can judge them over real working weeks rather than in a shop.
When should you replace shock absorbing insoles?
Because compression set happens slowly, most people notice a worn pair late. A few checks help:
- Thumb test: press the heel area firmly. A healthy foam springs back at once; a tired one stays dented or feels hard underneath.
- Look at the heel and forefoot: a deep heel print or a shiny, compressed patch under the ball of the foot means the foam has taken a set.
- Compare with the shoe’s own insole: if your insole is now barely thicker than the flat liner it replaced, it has little travel left.
- End-of-day feel: if your feet feel the way they did before you started using the insoles, the damping has probably gone.
Distance is a useful guide too. BOLLSEN® Insoles are rated for 800 to 1,200 km, which is roughly 8 to 10 months for a 100 kg wearer on their feet 8 hours a day. How far you walk, how long you stand and how warm your shoes get all move you within that range. Our guide on when to replace insoles also covers washing and drying, which keeps foam in better shape for longer.
Insoles are a comfort product. They change how a step feels, not how a foot is built. If your feet keep aching even in good shoes, or something feels wrong rather than just tired, the NHS guide to foot pain explains when to get medical help, and a GP or podiatrist can take a proper look.