⏱️ Estimated reading time: 13 min

On this page: Overview
Key Takeaways
Start with shoes that fit and grip your heel, take out tired factory insoles and use a cushioned, supportive pair, stand on a mat where you work in one spot, and change position often. Sit down on your breaks, drink water through the shift and look after your feet when you get home. Small changes add up over a 12-hour day.
Shoes that match the shape of your foot, hold your heel firmly, leave room to move your toes and fasten with laces, so your foot does not slide around. A removable insole matters too, because it lets you swap in a better one. On many sites your employer will also set rules for safety footwear.
A good insole can make long hours on hard floors more comfortable, with cushioning that lasts the shift and support under the midfoot. It is a comfort product, not a treatment. Our guide to the best insoles for standing all day explains which type suits which job.
Your rota and your employer’s policy set the formal breaks. Within the shift, the useful habit is changing position every few minutes: shift your weight, use a footrest, walk a few steps. On proper breaks, sit down and take the weight off your feet.
In Great Britain, the HSE says employers must assess the risk from noise at 80 dB(A) averaged over a day or week, and must provide hearing protection at 85 dB(A). A rough sign: if you have to raise your voice to talk to someone about 2 m away, ask your employer whether the noise has been assessed.
Eight hours on a shop floor. A twelve-hour shift on a ward. A double in a busy kitchen, or a night of picking orders across a warehouse. If your job keeps you on your feet, you already know how the last hour feels. These are the practical tips that make long shifts easier, from the shoes you put on in the morning to what you do with your feet when you get home.
None of this needs special kit or a change of job. Most tips cost nothing, and the ones that do (shoes, insoles, a mat) last for months. If you are still working out what kind of insole you need, our guide on how to choose insoles covers every type.
1. Do your work shoes actually fit?
Everything else in this list depends on your shoes. A shoe that is too short, too narrow or too loose will make itself felt by mid-morning, whatever you put inside it.
The Canadian Centre for Occupational Health and Safety (CCOHS) sums up what to look for in its guidance on working in a standing position: shoes that follow the natural shape of your foot, grip your heel firmly, leave your toes free to move, provide arch support and fasten with laces you can tighten over the instep. A heel that slips makes you grip with your toes all day. A shallow toe box squeezes.
Buy work shoes later in the day, when your feet are at their largest, and walk around the shop in them for a few minutes rather than sitting down. If your job calls for safety footwear, the same rules apply: check toe-cap clearance and whether the insole lifts out. We go into boot fit in more detail in our guide to insoles for work boots.
2. Should you have two pairs of work shoes?
If you can, yes. Feet sweat over a long shift, and a shoe that has not dried out properly by the next morning feels clammy from the first step. Rotating two pairs gives each one a full day to air.
It also spreads the wear across two pairs instead of one, and if one pair gets soaked on the way in, you have a dry spare ready.
3. Would a better insole make your shift more comfortable?
The insoles that come in most work shoes and trainers are thin foam, there mainly to cover the stitching. After a few weeks of daily shifts they pack down, and you are standing on the shoe itself. Replacing them is one of the simplest ways to change how your feet feel at hour seven, and the CCOHS guidance itself recommends a shock-absorbing, cushioned insole for work on concrete or metal floors.
For long shifts, look for a full-length insole with cushioning that springs back instead of flattening, support under the midfoot and a breathable top layer. Our guide to the best insoles for standing all day compares the main types and which jobs each one suits. As one example, BOLLSEN® Insoles combine EVA, SEBS and PORON® ShockPad foam with a Nylon Pebax shank under the midfoot. They come in UK 4 to 12.5: buy your shoe size, take out the factory insole, then trim the toe end to fine-tune if needed.
Plan on replacing insoles, too. Ours are rated for 800 to 1,200 km, roughly 8 to 10 months for a person of about 100 kg wearing them 8 hours a day. Once the cushioning feels flat under the heel or the top layer wears through, it is time for a new pair. A 40-day money-back guarantee gives you time to test a pair across several rotas.
4. Can you stand on an anti-fatigue mat?
Where you work in one spot, a mat helps. Tills, packing benches, workstations on a production line, the pass in a kitchen: anywhere you stand still for long spells on concrete, tiles or steel.
Thicker is not always better. CCOHS advises against thick foam-rubber mats, because too much cushioning can cause fatigue and make tripping more likely. A firm, resilient mat with slanted edges that lie flat is the better choice. If there is no mat where you work, ask. Mats are a cheap fix, and many employers simply have not thought of them.
A mat stays where it is, though. The moment you walk to the stockroom or across the ward, your shoes and insoles are doing all the work again, so treat the two as a pair rather than alternatives.
5. How often should you change position?
Often. Standing still for long spells is tiring because the same muscles hold the same position for hours, with little chance to move. The CCOHS advice is to change working position frequently, so that no single position lasts long.
In practice, that means small things every few minutes:
- Shift your weight from one foot to the other.
- Put one foot up on a foot rail, a low shelf or a box, then swap.
- Walk a few steps whenever the work allows: fetch something, restock, check a shelf.
- Rise onto your toes and back a few times, or roll your ankles while you wait.
None of these interrupt the work, and together they keep you from locking into one posture for an entire shift.
6. Are you using your breaks to sit down?
It sounds obvious, but many people spend their break standing in a staff room or queuing for food. Get off your feet for at least part of every break. If you can, sit with your feet up on a second chair for a few minutes.
CCOHS also recommends that a seat be available even in jobs done standing, so workers can sit for a while when the task allows. If your workplace has none, it is a fair thing to raise with a manager or your health and safety rep.
After time off, ease back in. The same guidance suggests an adjustment period after a holiday or illness, so your feet are not thrown straight into a full week of long shifts.
7. Is your work surface at the right height?
A bench or counter that is too low makes you stoop; one that is too high has you working with raised shoulders. Either way you end up shifting awkwardly for hours. CCOHS gives rough guides: light work about 5 to 10 cm below elbow height, precision work slightly above it, and heavy work lower still.
If your bench cannot be adjusted, a platform for a shorter worker or a raised block for a taller one does the same job. Keep the things you use most within easy reach, so you are not twisting and stretching every few seconds.
8. Are you drinking enough during a shift?
Long shifts in warm kitchens, busy warehouses or heated shops are thirsty work, and it is easy to go hours without a drink when you are busy. Keep a water bottle where you can reach it and drink little and often. If tea and coffee are the only drinks you get through a shift, add water alongside them.
Eat properly on your break too. A long shift on an empty stomach makes the last few hours feel harder, on your feet as much as anywhere else.
9. Is your workplace loud enough to need hearing protection?
This one surprises people, but plenty of standing jobs are noisy ones: warehouses with conveyors and forklifts, factory floors, commercial kitchens at full service, bars and music venues. Noise is tiring in its own right, and over time loud noise at work can damage your hearing permanently.
In Great Britain, the Control of Noise at Work Regulations 2005 set clear thresholds, explained on the HSE’s page on employers’ duties and noise action values. At a daily or weekly average exposure of 80 dB(A), employers must assess the risk and give workers information and training. At 85 dB(A), they must provide hearing protection and mark hearing protection zones. There is also an exposure limit of 87 dB(A), which must not be exceeded.
You do not need a sound meter to get a first idea. The HSE’s advice for workers suggests a simple check: if you have to raise your voice to hold a normal conversation with someone about 2 m away for at least part of the day, noise may be a risk where you work. Other signs include muffled hearing at the end of a shift.
If that sounds familiar, talk to your employer: assessing noise and providing hearing protection is their legal duty. Wear what they provide, every time you are in a loud area. If you would like your own pair as well, WorkPRO earplugs for loud workplaces are made to protect hearing on noisy sites.
10. How do you look after your feet after a shift?
What you do after work shapes how the next shift starts. Take your shoes off as soon as you can and let your feet breathe. Change damp socks rather than sitting in them, and choose socks that wick moisture, not thin cotton ones that stay wet.
Pull the insoles out of your work shoes at the end of the day so both dry properly overnight. Removable insoles can be washed, which keeps them fresher across a long week; we explain how to keep insoles fresh between shifts in a separate guide.
Then put your feet up for a while. After 12 hours of standing, a short spell with your feet raised is one of the simplest ways to end the day.
When should you see a GP or podiatrist?
Tired, aching feet at the end of a long shift are common, and the tips above are about comfort. Pain that keeps coming back, gets worse or changes the way you walk is different, and no shoe, mat or insole is the answer to it.
The NHS page on foot pain explains when to see a pharmacist, a GP or urgent care. You can also see an HCPC-registered podiatrist, and the Royal College of Podiatry has a tool to find a podiatrist near you.
The short version
Get shoes that fit and grip your heel, and rotate two pairs if you can. Replace flat factory insoles with a cushioned, supportive pair. Stand on a mat where you work in one place, change position every few minutes and sit down on your breaks. Drink water, check your work surface height and, if you have to shout to be heard, ask about the noise and wear hearing protection. Then give your feet time to rest before the next shift.