⏱️ Estimated reading time: 14 min

On this page: Overview
Key Takeaways
Sports insoles are replacement insoles for the shoes you train and play in: gym trainers, court shoes, football boots and cycling shoes. A good pair adds cushioning and some support under the midfoot while staying slim enough for a snug shoe. They are a comfort upgrade for the inside of the shoe, not a replacement for shoes that fit well.
Often, yes, but football boots are snug and low on volume, so the fit is never a given. Take the factory insole out rather than stacking, choose a slim insole and try it in your own boots at home before you play in them. If your heel lifts or your toes feel crowded, the boot is too full for that insole.
Not necessarily. One comfortable, slim pair can cover gym sessions, classes and easy runs if your shoes are similar inside. Gym work asks for a stable, flat base and running asks for cushioning over distance, so people who train a lot often keep one pair in their running shoes and another in their gym trainers.
Take them out after each session and let them and the shoes air-dry fully, away from radiators. Wash removable insoles by hand when they need it and let them dry completely before they go back in. Clean socks, dry feet and not wearing the same shoes two days in a row all help as well.
Many cycling shoes have a thin removable insole, and a slim replacement can sit in its place. Cycling shoes are stiff and close-fitting, though, so there is little spare room. Swap rather than stack, check that your toes and instep are not squeezed when the straps are done up, and try a short ride before a long one.
Sports shoes are built tighter than the shoes you walk around in. A tennis or padel shoe has to hold your foot still while you change direction, a football boot is cut close to the foot so you can feel the ball, and a cycling shoe locks your foot to a stiff sole. That snug fit is exactly what makes swapping the insole a little more delicate than it is in a pair of everyday trainers.
This guide goes through the main sport families one at a time: gym and training, court sports, football boots and cycling shoes. It covers what each kind of shoe asks of an insole, how to test the fit in a tight shoe and how to keep sweaty insoles fresh. If you are choosing an insole for everyday shoes, our guide to insoles for trainers is the place to start, and if you are still deciding what type of insole you need at all, see how to choose insoles.
What makes sports shoes different
Three things set sports shoes apart from everyday footwear, and all three affect the insole.
- Sideways movement. Court sports, football and many gym classes involve cutting, shuffling and quick stops. An insole that slides or bunches up inside the shoe is uncomfortable straight away, so it has to sit flat and stay put.
- Tight fit. Sports shoes are often worn snug on purpose. There is less spare depth inside, so a thick insole can lift your heel out of the heel cup or press your toes against the upper.
- Sweat. An hour of hard exercise in a closed shoe leaves the inside damp. The insole sits right where that moisture collects, so breathability and an easy way to clean it both matter.
None of this means you need a special insole for every sport. It means the insole has to be slim, sit flat and be easy to take out, dry and wash.
Gym and training shoes
Gym trainers have the widest job of any sports shoe. The same pair might do a warm-up on the treadmill, a circuit class, some lunges and a set of squats. The NHS physical activity guidelines for adults suggest strengthening activities on at least two days a week, so for many people the gym shoe sees a lot of use.
For lifting and floor work, many people prefer a stable, fairly flat feel underfoot rather than a deep, squashy one. For classes and short treadmill sessions, a bit more cushioning is pleasant. A slim layered insole covers both reasonably well: it adds cushioning without building up a tall, soft platform that your foot sinks into.
If most of your training is running, the priorities shift towards cushioning over distance, weight and how the insole changes the fit of a running shoe. Our guide to insoles for running covers that in detail. Many people who do both end up with one pair in their running shoes and another in their gym trainers, simply so nothing needs moving between sessions.
Court sports: padel and tennis
Padel and tennis are played in short bursts of sideways movement: split step, push off, recover, repeat. Court shoes are built with a firm upper and a close heel to keep your foot over the sole while you move, and that makes a secure insole important.
What to check in a court shoe after the swap:
- The heel sits deep. Push the insole right back into the heel cup before you lace up. If your heel feels higher in the shoe than before, the insole may be too thick for it.
- Nothing moves when you shuffle. Do a few side steps and quick stops on a hard floor at home. The insole should not slide forward or curl at the toe.
- The toe box still has room. Court shoes take a lot of stop-start pressure at the front, so your toes need space to spread without touching the end.
Padel shoes and tennis shoes are similar inside, so a pair trimmed for one usually sits well in the other if they are the same size. Trim to the tighter of the two. An insole that is a fraction short in the roomier shoe is fine; one that buckles at the toe in the tighter shoe is not.
Football boots
Football boots are the tightest shoe most people own. They are cut close to the foot, the upper is thin and there is very little depth between the sole and the top of the foot. Most boots come with a thin removable insole, but some have a lining that is glued in, and a few have almost nothing between the foot and the soleplate.
That is why we will not tell you a replacement insole definitely fits your boots. It depends on the boot. What we can say is that BOLLSEN® Insoles are slim enough for almost any shoe, and the only reliable test is your own boots on your own feet:
- Take the factory insole out and keep it. If it does not lift out, the boot is probably not a good home for a replacement insole.
- Lay the factory insole on top of the new one, heels lined up, and mark the toe outline.
- Trim a little outside the line, slide the new insole in and push it back into the heel.
- Put the boot on with the socks you play in and lace it as you would for a match.
- Walk, jog on the spot and do a few quick turns on carpet. Your heel should stay down, and your toes should not press against the front.
If the boot feels too full, do not force it. Astroturf trainers and boots with a slightly roomier fit are often an easier match, and the same insole can go in those instead. Never stack a new insole on top of the factory one in a football boot: there simply is not the room. And keep expectations realistic: an insole adds comfort inside the boot, nothing more.
Cycling shoes
Cycling shoes are the odd one out. Your foot is not landing on the ground with each step, so shock absorption matters less than in other sports. What riders notice instead is how the foot feels pressed against a stiff sole for an hour or more, and whether anything rubs or squeezes once the straps or dials are done up.
Road and mountain bike shoes with cleats are usually close-fitting with a thin removable insole. A slim replacement can take its place, but check three things before a long ride: that the straps still close comfortably over the instep, that your toes are not pressed against the end when your foot is at the bottom of the pedal stroke, and that your heel does not lift when you pull up. Flat-pedal and commuting shoes usually have more room and are an easier fit.
Start with a short ride. If you change the height of your foot in the shoe, it can feel different on the pedals at first, so give it a couple of rides before you decide.
Tight shoes and insole volume
Every sports shoe has a fixed amount of room inside, and the insole takes up part of it. The thicker the insole compared with the factory one, the higher your foot sits, and the less room is left over it. In a roomy shoe, you barely notice. In a snug sports shoe, a couple of millimetres can be the difference between a good fit and a tight one.
That is why the factory insole always comes out first, and why fit is a matter of size first and scissors second. Buy the size you wear, then trim only to fine-tune at the toe. Our step-by-step guide on how to trim insoles shows how to use the old insole as a template.
BOLLSEN® Insoles are built in thin layers for this reason: an EVA layer for flexibility, a soft SEBS layer, PORON® ShockPad foam for shock absorption, a Nylon Pebax shank for support and a breathable, moisture-managing top layer with ventilation holes. A dynamic bridge under the midfoot adapts to the foot as it moves. They come in UK sizes 4 to 12.5 (EU 36 to 47), and they are removable, so one pair can move between similar shoes. If you are weighing up materials for a tight shoe, our comparison of gel vs foam insoles looks at weight and feel side by side.
Sweat, washing and replacing sports insoles
Sports insoles work harder than most because they spend so much time damp. A few simple habits keep them pleasant to wear:
- Take them out after training. Lift the insoles out and open the shoes up, so both can dry. The NHS advice on smelly feet recommends letting shoes dry out before wearing them again and not wearing the same socks or shoes two days in a row.
- Dry them gently. Air-dry at room temperature, away from radiators, tumble dryers and direct sun, which can warp foam.
- Wash them when they need it. BOLLSEN® Insoles are washable. Wash them gently by hand and let them dry completely before they go back in. Our guide on how to wash insoles goes through it step by step.
- Look after your feet too. The NHS page on athlete’s foot advises wearing flip-flops in places like changing rooms and showers, and not sharing towels, socks or shoes.
Even good foam slowly loses its spring with use. BOLLSEN® Insoles are rated for 800 to 1,200 km, which works out at roughly 8 to 10 months for a 100 kg wearer on their feet 8 hours a day. Lighter use stretches that further. Replace them when the heel no longer springs back when you press it or the top layer has worn through.
New insoles, new shoes and blisters
Any change inside a sports shoe changes where it rubs. The NHS advice on friction blisters is to wear comfortable, well-fitting shoes and to wear new shoes for short periods at first. Treat a freshly fitted insole the same way: a short session or two before a match, a long ride or a full class.
An insole is a comfort product and is not a substitute for professional advice. If your feet keep hurting during or after sport, see a GP or a registered podiatrist. The Royal College of Podiatry can help you find a podiatrist near you.
Try them in your own sports shoes
The fit of an insole in a tight sports shoe is something only your own shoes can settle. Every pair of BOLLSEN® Insoles comes with a 40-day money-back guarantee, which is enough time to try them in your gym trainers, your court shoes and your boots, on carpet first and then in a real session. If they suit your everyday shoes better than your football boots, that is useful to know too: one pair can live in your trainers while your boots keep their factory insoles.