⏱️ Estimated reading time: 17 min

On this page: Overview
Key Takeaways
Look for a full-length insole whose cushioning keeps its shape for a whole shift, with a supportive midfoot, a breathable top layer and a slim enough profile for your work shoes. Layered insoles that combine a resilient foam such as PORON® with a firmer base and a shank usually hold up better on long shifts than a single layer of soft memory foam.
Both can work. Gel feels firm and springy but is heavier and can feel warm in closed shoes. Soft memory foam feels lovely at first, then tends to pack down under constant load. On concrete, the best choice is usually a layered foam insole made with a material that resists flattening, so the cushioning is still there at the end of the shift.
It depends on the materials, your weight and how much you walk. BOLLSEN® Insoles are rated for 800 to 1,200 km, which works out at roughly 8 to 10 months for a person of about 100 kg wearing them 8 hours a day. Replace any insole once the cushioning feels flat or the top layer wears through.
A well-cushioned, supportive insole can make long hours on hard floors more comfortable and bring some relief for tired feet after a long shift. It is a comfort product, not a treatment. If foot pain keeps coming back or gets worse, see a GP, a pharmacist or a registered podiatrist.
Yes, if the insole is removable and the shoes are a similar size and volume. Take out the original insole of each pair first, so the new one sits flat. Many people keep one pair for work shoes and a second for weekend trainers, which also gives each pair time to air between wears.
Eight hours on a shop floor, a twelve-hour shift on a ward, a double in a busy kitchen: by the end of it, your feet know exactly how hard the floor was. The right insole will not change the floor, but it can change what reaches your feet for every one of those hours.
This guide is for people who stand, and walk, for 8 to 12 hours at a time. It covers what an insole needs to keep you comfortable on a long shift, which type suits which job, how floors and mats fit in, and how to fit a new pair before your next shift. If you want the bigger picture on insole types first, our guide on how to choose insoles walks through every option.
What should an insole have for standing all day?
Plenty of insoles feel comfortable when you try them on in the morning. The test that matters is hour seven. For long shifts, five things count more than anything on the packet.
Cushioning that lasts the shift. Soft is easy. Soft that stays soft under your full weight for eight hours, day after day, is harder. Look at what the cushioning layer is made of and whether it springs back, not just how squashy it feels in the shop. We explain what makes an insole feel cushioned in a separate guide.
Support through the middle of the foot. When you stand still for long periods, your foot settles into the shoe. A supportive midfoot and a shank under the arch help the insole keep its shape instead of folding with the shoe. Exactly how much arch support you need depends on your feet and your shoes; for long shifts, a moderate level that feels comfortable from the first hour is a sensible starting point.
A slim, full-length fit. A full-length insole spreads cushioning from heel to toes and replaces the factory insole, so it does not crowd your toes. Heel pads and three-quarter insoles leave the forefoot unpadded, which you notice when you stand at a counter or lean forward over a bench.
Breathability. Feet get warm and damp over a long shift, especially in closed work shoes. A breathable, moisture-managing top layer and ventilation holes keep the inside of the shoe fresher than a solid plastic or gel surface.
A lifespan you can plan around. An insole that feels flat after a month is not cheap, whatever it cost. Look for a stated lifespan, and a guarantee that lets you test the pair on real shifts.
Which type of insole is best for long shifts?
Most insoles on sale fall into four broad types. Here is how they compare on the things that matter when you are on your feet all day.
| Insole type | Cushioning that lasts | Arch and heel support | Weight | Lifespan signal | Best for |
|---|---|---|---|---|---|
| Layered foam (PORON®, EVA, SEBS with a shank) | Good: resilient foam springs back after load | Moderate, from a shank and shaped midfoot | Light | Look for a stated distance or months of daily use | Long shifts on hard floors, standing and walking |
| Gel | Good shock absorption, firm feel | Often little, unless a shell is added | Heavier | Gel lasts, the cover and base wear first | Short spells of hard impact, roomy shoes |
| Memory foam | Very soft at first, then packs down | Little | Light | Soft feel fades as the foam compresses | Light use, shorter shifts |
| Firm or rigid shell | Little cushioning | Firm, fixed shape | Light to medium | Shell lasts, top cover wears | People who like a firm feel; prescribed devices come from a podiatrist |
For shifts of 8 to 12 hours, the layered type usually wins because it is designed to do two jobs at once: soft enough to feel cushioned, resilient enough to still be cushioned when you clock off.
Why do some insoles go flat by the middle of a shift?
Standing still is a strange kind of load. There is no bounce and no rest, just your body weight pressing into the same spots for hours. Soft memory foam is made to mould and stay moulded, which is lovely for a pillow and less useful under a heel that does not move for an hour at a till. Once the foam has packed down, you are effectively standing on the shoe again.
Engineers call the ability to spring back after long squeezing “compression set resistance”. Rogers Corporation, which makes PORON® polyurethane foams, lists excellent compression set resistance among the properties of its PORON® ShockPad foam, alongside impact protection in thin layers. In plain terms: it is designed to recover its shape rather than stay flattened.
That is the thinking behind BOLLSEN® Insoles (PORON® ShockPad + Pebax shank). Each insole stacks five layers, each with one job:
- EVA for flexibility, so the insole bends with your foot as you walk
- SEBS for softness underfoot
- PORON® ShockPad foam for shock absorption
- A Nylon Pebax shank for support under the midfoot
- A breathable, moisture-managing top layer, with ventilation holes
A dynamic midfoot bridge adapts to the shape of your foot, so the support moves with you rather than feeling like a hard lump. The aim is comfort that lasts as long as the shift does, not a soft feeling that has gone by lunchtime.
Does the floor you stand on make a difference?
A big one. Concrete and metal give nothing back, so every bit of cushioning has to come from your shoes and insoles. A sprung timber floor, cork, rubber, or vinyl laid over an underlay all have a little give of their own. The Canadian Centre for Occupational Health and Safety advises avoiding standing on concrete or metal floors where possible and recommends wooden, cork or rubber-covered floors for standing work. Where concrete is unavoidable, its guidance on working in a standing position suggests a shock-absorbing cushioned insole and covering the floor with mats.
A rough guide to how hard your floor is:
- Hardest: bare or sealed concrete (warehouses, stockrooms, workshops), steel plate, quarry tiles laid on concrete (many commercial kitchens)
- Middle: vinyl or carpet tiles stuck straight onto concrete (many shops, offices and hospital corridors)
- Softest: sprung timber, cork, rubber flooring, vinyl over a cushioned underlay
Many floors that look soft are concrete with a thin finish on top. If you can hear a hard click when you walk in work shoes, treat it as concrete when you choose your insoles.
Anti-fatigue insoles or anti-fatigue mats?
Anti-fatigue mats are great where you stand in one spot: behind a till, at a packing bench, at a kitchen pass. They do nothing once you step off them. Insoles travel with you, which matters in jobs where you move between stations, walk the ward or cross a warehouse dozens of times a shift.
More cushioning is not always better, though. The same CCOHS guidance warns against thick foam-rubber mats, because too much cushioning can cause fatigue and increase the risk of tripping. The same idea applies inside a shoe: a very thick, squashy insole can feel less stable underfoot and can crowd the shoe. Moderate, resilient cushioning plus some support is the better aim.
If you have the choice, use both: a mat where you stand still, a good insole for everything else. “Anti-fatigue insole” is a marketing label rather than a type, so judge any insole sold under that name on the same five points as above.
What insoles work best for retail and shop work?
Retail shifts mix long spells standing at a till or on a fitting-room door with bursts of walking: restocking, fetching sizes, crossing the stockroom. The shop floor is often vinyl or carpet tiles straight onto concrete, and the stockroom is usually bare concrete.
Most shop dress codes mean smart black shoes or clean trainers, so profile matters. A slim, full-length insole that replaces the original keeps the fit of a fitted shoe. If your work shoes have a glued-in insole, check whether you can lift it out before you buy, because adding a second layer on top of it rarely fits well.
What about nurses and healthcare staff?
Nursing shifts often run to 12 hours, and a ward shift is as much walking as standing: bays, corridors, the drug round, then back again. Hospital floors are usually vinyl over a hard base, easy to clean and not especially forgiving.
Clogs and slip-ons are popular on wards, but many have a moulded footbed that cannot be removed. In those, an insole will not fit properly. Lace-up trainers or work shoes with a removable insole give you more options. Because the insole is washable, it also suits healthcare settings, where staff tend to prefer kit they can clean easily.
What do chefs and hospitality staff need from an insole?
Kitchens combine three things that are hard on feet: hard floors, heat and long hours. Quarry tiles and sealed concrete are common, and slip-resistant kitchen shoes can be stiff. Front-of-house staff walk long distances on a busy service, in smart shoes with little room inside.
For kitchens, prioritise a breathable, moisture-managing top layer and an insole you can wash. A gel insole can feel warm in a hot kitchen, so a ventilated foam insole tends to be the more comfortable choice. Swap insoles between two pairs of shoes if you can, so each pair dries out fully between shifts.
What about warehouse and logistics work?
Warehouse floors are almost always concrete, and pickers can cover many kilometres a shift. Most sites require safety footwear, which brings its own fit questions: toe caps leave little room above the toes, so a thick insole stacked on top of the factory one can crowd your foot.
Take out the original insole, use a slim full-length replacement and check that your toes still move freely inside the toe cap. Boot fit, volume and toe-cap clearance get their own guide on insoles for work and safety boots.
What if you walk as much as you stand?
Plenty of jobs are not really standing jobs at all: ward staff, warehouse pickers, hospitality runners, retail managers. If your shift involves as much walking as standing, the best insoles for walking all day share the same features: cushioning that recovers between steps, a flexible forefoot so the insole bends with every stride, and a shank so the midfoot does not collapse by the afternoon.
The difference is mostly wear. Walking adds distance, and distance is what wears an insole out. That brings us to lifespan.
How long do insoles last if you stand 8 hours a day?
Lifespan depends on three things: the materials, your body weight and how much you walk. Cheap single-layer foam can feel flat within weeks of daily shifts. A layered insole with resilient foam lasts considerably longer.
BOLLSEN® Insoles are rated for 800 to 1,200 km. For a person of about 100 kg wearing them 8 hours a day, that works out at roughly 8 to 10 months. The rating is based on that weight and those hours, so treat it as a guide rather than a date. Rotating two pairs spreads the distance across both.
If you walk a lot on shift, count distance rather than months. Long shifts with a lot of walking sit at the shorter end of that range, so keep an eye on the wear signs rather than the calendar. A step counter on your phone gives you a realistic figure.
Whatever the number on the box, the signs are the same: the cushioning feels flat under the heel or the ball of the foot, the top layer is worn through, or the insole has lost its shape. Our guide on when to replace insoles covers cleaning and replacement in more detail.
How do you fit a new pair before your next shift?
A good insole in the wrong size will not feel good for long. Fitting takes ten minutes.
- Buy your shoe size. BOLLSEN® Insoles come in UK 4 to 12.5 (EU 36 to 47). Choose the size you wear in shoes.
- Take out the original insole. The new one replaces it. Two insoles stacked together raise your heel and crowd your toes.
- Compare and trim to fine-tune. Lay the original on top of the new insole, heels aligned, and trim the toe end along the outline if needed. Take off a little at a time; you cannot add it back. Our guide on how to trim insoles to fine-tune the fit has the details.
- Try them at home first. Wear the shoes around the house for an hour or two. Check that your heel sits snugly and your toes move freely.
- Build up the hours. If you have never worn a supportive insole, start with part of a shift and build up over a few days.
The real test is a full working week, not ten minutes in the kitchen. That is why every pair of BOLLSEN® Insoles comes with a 40-day money-back guarantee: long enough to wear them through several rotas and decide.
What else helps on long shifts?
Insoles are one part of the picture. Shoes that fit, with room for your toes and a heel that does not slip, matter just as much. So do the small habits: shifting your weight, using a foot rail or footrest where there is one, sitting during breaks, and alternating between two pairs of work shoes so each has a day to dry out. We have collected more tips for getting through a long shift on your feet, from mats to micro-breaks, in a separate article.
When should you see a podiatrist?
Tired feet at the end of a long shift are common. Pain that keeps coming back, gets worse, or changes how you walk is different, and an insole is not the answer to it. The NHS has a guide to foot pain that explains when to get medical help, and a pharmacist or GP can advise you. You can also see a registered podiatrist; the Royal College of Podiatry has a tool to find a podiatrist near you.
The short version
For shifts of 8 to 12 hours on hard floors, choose a slim, full-length insole with cushioning that springs back, real support under the midfoot, a breathable top and a lifespan you can plan around. Take the factory insole out, buy your size and trim to fine-tune, then give the pair a proper trial across a full rota. Add a mat where you stand still and a second pair of shoes if you can, and you give your feet the best chance of finishing the week comfortably.
Pingback: Cushioned Insoles: What Really Makes Them Comfortable | BOLLSEN
Pingback: Best Insoles for Work Boots and Safety Boots | BOLLSEN
Pingback: Standing All Day at Work: Tips for Long Shifts | BOLLSEN
Pingback: Types of Insoles: How to Choose the Right Pair | BOLLSEN