Arch Support Insoles: What Arch Support Does in an Everyday Insole

⏱️ Estimated reading time: 14 min

Short answerArch support in an everyday insole is about comfort and fit, not correction. A contoured midfoot spreads your weight and gives a steady, held feel. Flexible, medium and firm shanks suit different shoes; a medium shank with cushioning is a sensible start. Use a wet-footprint test to pick a contour, and see a GP or podiatrist if pain persists.
Hand placing a plain light grey insole into a brown walking shoe on a wooden floor, with navy trainers beside it
On this page: Overview
    Summarize with AI

    Key Takeaways

    An arch support insole has a contoured shape under the middle of your foot, so the midfoot rests on the insole instead of hovering over a flat footbed. That spreads your weight over a larger area and gives a held, steady feel in the shoe. In an everyday comfort insole, the support is about comfort and fit, not about changing how your feet are built.

    There is no single right amount. Start with the shoes you wear most and how long you spend on your feet, then try a medium level of support and see how it feels after a full day. A simple wet-footprint test can help you guess which insole shape will feel best. If your feet feel pushed or pinched, go softer; if they feel unsupported, try a firmer shank.

    They should feel noticeable but never sharp. Good support feels like even contact under the whole foot, with no hard edge digging into the midfoot. Firmer is not automatically better: a very rigid insole can feel uncomfortable in flexible trainers. Many people prefer a medium shank with a cushioned top layer, especially for long days of standing and walking.

    Most people can, once they are used to them. Any new insole changes how your shoe feels, so it is sensible to build up wear time over the first few days, a few hours at first and then longer. If a pair still feels uncomfortable after that, the shape or firmness may simply be wrong for your feet or your shoes.

    Insoles are a comfort product, not a medical one. Foot pain that does not settle, gets worse, keeps coming back or gets in the way of everyday life, or any tingling or numbness, is a reason to speak to a GP or an HCPC-registered podiatrist. They can assess your feet properly and tell you whether you need something prescribed rather than an over-the-counter insole.

    Arch support is one of the first things people look for when they shop for insoles, and one of the least explained. Labels promise “firm support” or “maximum arch support” without saying what that means for the shoes you actually wear, or for how your feet feel at six o’clock in the evening.

    This guide explains what arch support in an everyday insole does, how firm or flexible it should be, how to work out which shape will feel right, and when an over-the-counter insole is the wrong tool altogether. If you are still deciding between soft comfort and a more structured feel, our guide to cushioned insoles covers the softer end, and the wider guide on how to choose insoles walks through every type.

    What arch support in an everyday insole actually does

    Most shoes come with a thin, flat foam insert. Your foot is not flat underneath: between the heel and the ball of the foot, the midfoot rises in a curve. On a flat footbed, that part of the foot has little to rest on, so the heel and forefoot take most of your weight.

    An arch support insole fills some of that gap. It has a raised, contoured section under the midfoot, so more of the sole is in contact with the insole. The practical effects are simple:

    • Weight spread over a larger area. With the midfoot sharing the load, the heel and ball of the foot are not doing all the work, which many people find more comfortable on long days.
    • A held, steady feel. The contour gives your foot a defined place to sit in the shoe, so it moves around less, especially in shoes with a little extra room.
    • A structure for the cushioning. Soft foam alone can feel lovely at first and then pack down. Support underneath gives the cushioning a stable base.

    That is the whole job. Arch support in a comfort insole is about how your shoes feel and fit. It is not a treatment, and it does not change the shape of your foot.

    Support is not correction

    It is worth being clear about this, because the arch support market is full of medical language. An over-the-counter comfort insole is made to standard sizes and shapes. It can make a shoe feel more supportive, more cushioned and more comfortable for standing and walking. It is not designed to change how your foot is built or how it moves, and it is not a substitute for a device a clinician prescribes after assessing your feet.

    Think of it like a good office chair. A chair with a good shape makes a long day at a desk more comfortable, but nobody expects it to fix a medical problem. Arch support in an insole works on the same level: comfort, fit and feel.

    Firm, medium or flexible: how the shank changes the feel

    The part of an insole that decides how “supportive” it feels is usually the shank, a stiffer piece that runs under the midfoot. Its stiffness, and how much the insole bends, changes the feel more than any label does. Broadly, insoles fall into three groups.

    Arch support levels compared: how each one tends to feel
    Support levelHow it feelsShoe typesWho it tends to suit
    Flexible shankBends easily with the foot; a light, barely-there contour under the midfootTrainers, everyday shoes, low and slim shoesPeople who want a little shape without noticing it, shorter wears, first-time insole wearers
    Medium shankHolds its shape under the midfoot but flexes at the toes; a held, steady feel, usually with cushioning on topWalking shoes, work shoes, boots and trainers with some roomLong days of standing and walking, people who like support and cushioning together
    Firm shankStiff and clearly structured; the insole hardly bends under the midfootStiff boots, walking boots, roomy work bootsPeople who already know they like a firm, structured feel in stiff footwear

    A few points the table cannot show. First, the shoe matters as much as the insole. A firm shank in a soft, flexible trainer can feel like a plank, because the shoe wants to bend and the insole does not. A flexible insole in a stiff walking boot may barely register. Second, the cushioning on top changes the feel of the support underneath: a medium shank under a soft top layer often feels gentler than a firm shank under thin fabric. Third, preferences change with the day. Many people who stand for long shifts like a little more structure than they would want for a short walk to the shops.

    If you are not sure where to start, a medium level of support with a cushioned top layer is a sensible starting point for most everyday shoes. You can always move firmer or softer from there.

    Your arch profile as a fit guide: the wet-footprint test

    The shape of your footprint can give you a rough idea of which insole contour is likely to feel best. It is a fit check, nothing more. It does not tell you anything about the health of your feet, and footprints vary a lot from person to person, sometimes even from left foot to right.

    To try it:

    1. Wet the sole of one foot, or step in a shallow tray of water.
    2. Stand normally on a piece of card, a brown paper bag or a dry paving slab, with your weight spread evenly.
    3. Step off and look at the print, then repeat with the other foot.

    Then look at the band between the heel and the ball of the foot:

    • A wide band, with most of the midfoot showing. Your midfoot already sits close to the ground. A lower, gentler contour often feels best, because a tall arch shape can press into the midfoot rather than support it.
    • A medium curve. A medium contour and medium shank are a sensible starting point.
    • A narrow band, or a gap between heel and forefoot. Your midfoot sits higher above a flat footbed, so you may notice that gap in ordinary shoes. A more contoured insole that fills it tends to feel more comfortable.

    Whatever your print shows, the real test is how the insole feels in your own shoes after a few hours. The footprint just helps you decide where to start.

    Heel support and heel cup depth

    Arch support is only half of how an insole holds the foot. The other half happens at the back, in the heel cup: the raised rim that cradles your heel.

    A deeper heel cup wraps further around the heel, keeps it centred in the shoe and adds to that held feeling. It also takes up more room, so it suits shoes with some depth, such as boots and walking shoes. A shallower cup sits better in low trainers and slimmer everyday shoes, where a deep cup can push the heel up and out of the shoe.

    Some people try separate heel cups or half-length inserts instead of a full insole. They take up less space, but they only work at the back of the foot and do nothing under the midfoot. Our comparison of heel cups vs full-length insoles goes into the trade-offs. If arch support is what you are after, you need a full-length or at least three-quarter insole with a shaped midfoot section.

    How to check that an insole feels right

    However good an insole looks on paper, the only verdict that counts is the one your feet give in your own shoes. A simple routine helps:

    1. Take out the original insert first. Laying a new insole on top of the old one usually makes the shoe too tight and lifts your heel.
    2. Check the arch sits where your arch is. Stand on the insole outside the shoe. The highest point of the contour should sit under your midfoot, not ahead of it or behind it. This is why size matters so much: on the wrong size, the support lands in the wrong place.
    3. Buy your size, then trim to fine-tune. Trimming at the toe end helps the insole sit flat in a particular shoe. It cannot move the arch section, so start with your own size rather than a bigger one cut down.
    4. Stand, then walk. Stand for a few minutes, then walk around the house. You are looking for even contact under the whole foot, no hard edge under the midfoot, no heel slipping and enough room for your toes.
    5. Build up wear time. Give your feet a few days to get used to a new feel, starting with a few hours and wearing them for longer each day.

    If an insole still feels wrong after a week or so, trust that. It may be too firm for the shoe, too tall for your arch shape or simply the wrong size.

    When an over-the-counter insole is not the right tool

    When to see a GP or podiatrist

    An over-the-counter insole is a comfort product. It is never a substitute for a prescribed device or for professional advice. The NHS advises seeing a GP about pain in the bottom of the foot if it stops you doing normal activities, gets worse or keeps coming back, or has not improved after two weeks of looking after it at home. The same goes for any tingling, loss of feeling or weakness in the foot.

    A podiatrist specialises in feet and can assess how your feet work and whether you need anything beyond a comfort insole. The Royal College of Podiatry lets you find a podiatrist near you, and you can check that a podiatrist is registered on the HCPC register. For how prescribed devices differ from what you buy off the shelf, see our guide to the difference between insoles and orthotics.

    Where BOLLSEN® Insoles sit

    BOLLSEN® Insoles are a full-length, over-the-counter comfort insole. They combine support under the midfoot with cushioning on top, the balance described above. If that sounds like what you are after, here is how they are built, layer by layer:

    • Nylon Pebax shank for support under the midfoot, with a dynamic midfoot bridge that adapts to the foot.
    • PORON® ShockPad foam for shock absorption with every step.
    • SEBS for softness and EVA for flexibility, so the insole moves with your shoe.
    • A breathable, moisture-managing top layer with ventilation holes.

    In practice, that makes them a comfort insole with a Nylon Pebax shank and midfoot bridge, rather than a rigid support. They come in UK sizes 4 to 12.5 (EU 36 to 47): buy your size, then trim to fine-tune the fit in a particular shoe. They are removable and washable, swap between shoe types, and last around 800 to 1,200 km, roughly 8 to 10 months for a person weighing 100 kg on their feet 8 hours a day.

    If you spend long days on your feet, our guide to insoles for standing all day looks at what matters most for long shifts. Every pair comes with a 40-day money-back guarantee, so you have time to try them in your own shoes, on your own routine.

    So, how much arch support do you need?

    For most people and most everyday shoes, a medium level of support with a cushioned top layer is the best place to start. Go more flexible for light trainers and short wears, and firmer only if you know you like a structured feel and your shoes are stiff enough to take it. Use the wet-footprint test to choose a contour, check the arch lands under your midfoot, and give your feet a few days to get used to the change.

    And keep the line between comfort and care clear. An insole can make your shoes feel better. Feet that keep hurting are a job for a GP or podiatrist, not for a new pair of insoles.

    2 thoughts on “Arch Support Insoles: What Arch Support Does in an Everyday Insole”

    1. Pingback: Insoles vs Orthotics: The Difference Explained | BOLLSEN

    2. Pingback: Best Insoles for Standing All Day: A Long-Shift Guide | BOLLSEN

    Comments are closed.